Products
Transformer Tester
HV Testing Equipment
Series Resonant Equipment
Secondary Circuit Tester
Cable/Lightening Arrester Tester
Earth/Insulation Series
Electrical Measurement & Transformer
Other Electrical Tester
test1
test2
test3
test4
Recommended Products
Contact Us
  • ADD:China Wuhan East Lake hi tech Development Zone (Optics Valley of China)
    TEL:+86 400-6884446
    FAX:+86 400-6884446
    E-mail:whguozi@163.com

GOZ-GM-20kV Series Adjustable digital high voltage megger / megameter/ meg ohm meter

GOZ-GM-20kV Series Adjustable digital high voltage megger / megameter/ meg ohm meter
  • Series Adjustable digital high voltage megger / megameter/ meg ohm meter
Product Description
    GOZ-GM-20kV series adjustable digital high voltage meg ohm meter is designed to solve the high-voltage substations and power plants on-site strong interference testing electrical characteristics of the insulation resistance of large high-voltage transformer, electrical appliances, remote power cables or laying cables, and also widely used in wide range of fields electrical insulation resistance characteristic measurements. The adjustable high voltage digital megger has advantages of testing high voltage and large power. The tested objects are with power frequency induction high voltage leak or strong interference, for the personal safety, firstly a ground wire should be connected before using the meter. 
    Also called: Adjustable high voltage megger, meg ohm meter, digital megger, high voltage megameter 
 
Product illustrations
 
Product Features
1. Digital megger has strong electric field induced anti-interference ability up to 2mA (50Hz), known to accommodate 500,000V substation site wire measuring and 500,000V transformer insulation resistance parameters testing. 
2. Short-circuit current test power > 5mA, maximum 15mA. Adapt to large-capacity, high inductance test. 
3. Resistance measurement has wide range, from 0.5MΩ ~ 200000MΩ. Accurate reading, high resolution. 
4. Wide supply voltage range, it can choose 0.25,0.5,1,2.5,5,10,15kV, and also from 0V smooth continuous adjustment to the required voltage. 
5. The digital meg ohm meter has timing function to remind users recording, and also analyze absorption ratio and polarization index of measured object.
Product parameters

 

Specifications

Model

Testing voltage

Voltage accuracy

Short circuit current

GM-5kV

00.250.512.55kV

±(5%+10V)

5mA

GM-10kV

0.512.5510kV

±(5%+10V)

5mA

GM-15kV

12.551015kV

±(5%+10V)

5mA

GM-25kV

0.512.551025kV

±(5%+10V)

5mA

Range and accuracy

Range (limit voltage)

Effective resistance measurement range

Accuracy

25MΩ/500V

0.519.99MΩ

±(5%+5character)

250MΩ/1000V

5.0199.9MΩ

±(5%+5 character)

2GΩ

0.051.999GΩ

±(5%+5 character)

25GΩ

0.519.99GΩ

±(5%+5 character)

250GΩ

50199.9GΩ

±(10%+10 character)

2500GΩ

501999GΩ

±(25%+10 character)

GΩspan calibration voltage: 2.5kV

 

Electric anti-interference ability

2mA(50Hz)

Timing & alarm

Stopwatch displays a maximum of 19 minutes and 59 seconds with 20 minutes a cycle. Sound reports in 15 seconds, 60 seconds and every minute. To point reports short sound, and resistance reading lasts for 5 seconds, while the measured resistance is less than the lower limit of the range, the reading is invalid with continuous sound alarm.

Show table

Three and a half LCD digital meters respectively show the test voltage, resistance and time.

Power supply

Enclosing 1.2V / 2000mAh Nimh rechargeable batteries 10, DC12V power supply. With AC (50 / 60Hz) 220V access port for battery charging or floating charge.

Using condition

Temperature: 040

Relative humidity2090%

Size

315×240×155mm3

Weight

5kg