GOZ-JJ-80 Insulating Oil Dielectric Strength Test Device
GOZ-JJ-80 insulating oil dielectric strength test device is based on the international IEC-156 and international GB507-86 "insulating oil dielectric strength test" requirements, combined with the practical application of the majority of users, and then develops this fully automated instruments. The instrument chooses microcontroller-driven and sets the boot, while the entire process is controlled by microcomputer automatic operation with simple and easy operation characteristics. GOZ Technology can meet requirements like China State Grid Electricity Power Research Institute and other relevant authorities inspection, and issue a partial discharge ultrasonic positioning system test report.
1．With automatic detection function, the device can automatically enter the reset state and implement the regulator back to zero.
2．Using a micro TPU-A panel printer, automatically one-time printing.
3．It can change the number of tests, stirring and standing time, sound and light control reminding and disposable continuous printing according to user needs.
4．The device adopts automatic magnetic mixing which can eliminate of uneven oil sample and bubbles.
1．Power supply: AC 220V ±10%、50Hz ±5%
2. Measure range: AC 0-80kV
3. Limited current: 5mA
4. Measurement Accuracy: 1.5%
5. Regulating speed: 2.5kV/S±10%
6. Predefined setting: number 1-9
Mixing time: 0-1:39 (minute)
Standing time; 0-10:39 (minute)
7. Using condition: temperature 5-35℃, relative humidity ≤75%
8. Oil cup gap: 2.5mm (oil cup feeler diameter)
9. Size: 415×315×315mm3
10. Weight: 28kg